| Peer-Reviewed

Development of Wearable Embedded Hybrid Powered Energy Sources for Mobile Phone Charging System

Received: 6 April 2023    Accepted: 11 May 2023    Published: 24 May 2023
Views:       Downloads:
Abstract

Mobile phones are an essential part of our day to day living. The increased reliance on mobile phone devices for communication, information sharing, connectivity and entertainment calls for a greater need to keep this device in a functional condition at all times. The epileptic nature of utility power supply, non-accessibility to power in remote locations and affordability of power due to high tariffs calls for a relative option to maintain connectivity of mobile phones. This research proposes to develop wearable embedded powered energy sources for charging mobile phones as a backup for instant and seamless charging of the phone battery once it drains. Our research addresses the inability of mobile phone users to charge their flatten phone batteries conveniently and seamlessly anytime and anywhere they find themselves. The hybrid powered charging system has the ability to harvest dissipated heat within the body of the phone and heat sources from the environment using an energy harvester, alongside the second energy source provided by the solar panel. The energy harvester will serve as a cooling measure to the device to maintain a stable temperature. The entire embedded device not only serves as an alternative power supply but also a protective covering to the mobile phone.

Published in International Journal of Intelligent Information Systems (Volume 12, Issue 2)
DOI 10.11648/j.ijiis.20231202.11
Page(s) 26-30
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Mobile Phone, Solar System, Energy Harvesting, Charger

References
[1] Abhimanyu Ssowntharrajan (2020). Design and implementation of a mobile phone charging system based on solar energy harvesting.
[2] Md. Anwarul Abedin. & Md. Alauddin (2019). Solar Powered Mobile Phone Charger for Farmers. Duet Journal (2). http://103.133.35.64:8080/jspui/bitstream/123456789/417/1/3.pdf
[3] Bang Tran, Joshua Ovalle., Karl Molina., Ruben Molina. & Ha Thu Le (2021). Solar-Powered Convenient Charging Station for Mobile Devices with Wireless Charging Capability. WSEAS Transactions on Systems. doi: 10.37394/23202.2021.20.29.
[4] Gladwin Antony., Hanharan S., Hari Haran. & Clement Raj. (2021). Design of solar charging case for mobile phones. International conference on physics and energy, 1-6. Journal of Physics conference series. doi: 10.1088/1742-6596/2040/1/01203.
[5] Kadam P., Sontakke M., Narate Agrawal R. & Sorte S. (2022). Design of mobile solar powered public station using RFID.. International conference on Electronics and Renewable systems, 186-191. doi: 10.1109/ICEARS5357952364.
[6] Rahil Imtiyaz., Aman Kumar. & Gutanjail Mmehta. (2021). Design and implementation of solar powered wireless mobile phone battery charger using electromagnetic induction. International journal of innovative research in science, engineering and technology.
[7] Raj A. S., Prabhavathy B. & Hawkinson S. J (2020). “Rehabitated solar powered consumed utilitarian charging device for mobile phone using ABD”. International Journal of Psychosocial Rehabilitation. 24 (8).
[8] Taverne, Jonas, Muhammad-Sukki, Firdaus, Ayub, Ahmad Syahir, Sellami, Nazmi, Abu-Bakar, Siti Hawa, Bani, Nurul Aini, Mas'ud, Abdullahi Abubakar & Iyi, Draco (2018). Design of solar powered charging backpack. International journal of power electronics and drive systems. (2) 848-858. https://doi.org/10.11591/ijpeds.v9n2.pp848-858
[9] Tran Bang, Ovalle Joshua, Molina Karl, Molina R., and Le H. T. Solar-Powered Convenient Charging Station for Mobile Devices with Wireless Charging Capability. WSEAS Transactions on Systems, 20, 260-271.
[10] Udayalakhmi J. K. and Sheik Mohammed. S. Design and Implementation of solar powered mobile phone charging station for public places. Proceedings of the 2018 IEEE International conference on current trends towards converging technologies. 1-5.
[11] Samanvita N, Shruti Gatade, Singaravelan A, Shreeram Kulkarni (2022). Automatic Coin-Based Solar Tracking System Cell Phone Charger. Published in: 2022 Fourth International Conference on Emerging Research in Electronics, Computer Science and Technology (ICERECT). Date of Conference: 26-27 December 2022. DOI: 10.1109/ICERECT56837.2022.10059595.
[12] Prajval Kadam, Mayur Sontakke, Aniket Narale, Rahul Agrawal, Swati Sorte (2022). Design of Mobile Solar Powered Public Station Using RFID. Published in: 2022 International Conference on Electronics and Renewable Systems (ICEARS). Date of Conference: 16-18 March 2022. DOI: 10.1109/ICEARS53579.2022.9752364.
[13] Jabbar Hamid and Jeong Taikyeong (2022). Ambient Light Energy Harvesting and Numerical Modeling of Non-Linear Phenomena. Appl. Sci. 2022, 12, 2068. https://doi.org/10.3390/app12042068
[14] Hao Cao, Xiaoping Wu, Hao Wu, Yajia Pan, Dabing Luo, Ali Azam & Zutao Zhang (2022). A Hybrid Self Powered System Based on Wind Energy Harvesting for Low Power Sensors on Canyon Bridges. International Journal of Precision Engineering and Manufacturing-Green Technology https://doi.org/10.1007/s40684-022-00424-0
[15] Xinqing Xiao, Meng Wang, Guoqing Cao (2023). Solar energy harvesting and wireless charging based temperature monitoring system for food storage. Sensors International. Vol 4, 2023, 100208. https://doi.org/10.1016/j.sintl.2022.100208
Cite This Article
  • APA Style

    Asianuba Ifeoma Benardine, Ezeofor Chukwunazo Joseph, Musa Martha Ozohu, Ugwu Chidiebere. (2023). Development of Wearable Embedded Hybrid Powered Energy Sources for Mobile Phone Charging System. International Journal of Intelligent Information Systems, 12(2), 26-30. https://doi.org/10.11648/j.ijiis.20231202.11

    Copy | Download

    ACS Style

    Asianuba Ifeoma Benardine; Ezeofor Chukwunazo Joseph; Musa Martha Ozohu; Ugwu Chidiebere. Development of Wearable Embedded Hybrid Powered Energy Sources for Mobile Phone Charging System. Int. J. Intell. Inf. Syst. 2023, 12(2), 26-30. doi: 10.11648/j.ijiis.20231202.11

    Copy | Download

    AMA Style

    Asianuba Ifeoma Benardine, Ezeofor Chukwunazo Joseph, Musa Martha Ozohu, Ugwu Chidiebere. Development of Wearable Embedded Hybrid Powered Energy Sources for Mobile Phone Charging System. Int J Intell Inf Syst. 2023;12(2):26-30. doi: 10.11648/j.ijiis.20231202.11

    Copy | Download

  • @article{10.11648/j.ijiis.20231202.11,
      author = {Asianuba Ifeoma Benardine and Ezeofor Chukwunazo Joseph and Musa Martha Ozohu and Ugwu Chidiebere},
      title = {Development of Wearable Embedded Hybrid Powered Energy Sources for Mobile Phone Charging System},
      journal = {International Journal of Intelligent Information Systems},
      volume = {12},
      number = {2},
      pages = {26-30},
      doi = {10.11648/j.ijiis.20231202.11},
      url = {https://doi.org/10.11648/j.ijiis.20231202.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijiis.20231202.11},
      abstract = {Mobile phones are an essential part of our day to day living. The increased reliance on mobile phone devices for communication, information sharing, connectivity and entertainment calls for a greater need to keep this device in a functional condition at all times. The epileptic nature of utility power supply, non-accessibility to power in remote locations and affordability of power due to high tariffs calls for a relative option to maintain connectivity of mobile phones. This research proposes to develop wearable embedded powered energy sources for charging mobile phones as a backup for instant and seamless charging of the phone battery once it drains. Our research addresses the inability of mobile phone users to charge their flatten phone batteries conveniently and seamlessly anytime and anywhere they find themselves. The hybrid powered charging system has the ability to harvest dissipated heat within the body of the phone and heat sources from the environment using an energy harvester, alongside the second energy source provided by the solar panel. The energy harvester will serve as a cooling measure to the device to maintain a stable temperature. The entire embedded device not only serves as an alternative power supply but also a protective covering to the mobile phone.},
     year = {2023}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Development of Wearable Embedded Hybrid Powered Energy Sources for Mobile Phone Charging System
    AU  - Asianuba Ifeoma Benardine
    AU  - Ezeofor Chukwunazo Joseph
    AU  - Musa Martha Ozohu
    AU  - Ugwu Chidiebere
    Y1  - 2023/05/24
    PY  - 2023
    N1  - https://doi.org/10.11648/j.ijiis.20231202.11
    DO  - 10.11648/j.ijiis.20231202.11
    T2  - International Journal of Intelligent Information Systems
    JF  - International Journal of Intelligent Information Systems
    JO  - International Journal of Intelligent Information Systems
    SP  - 26
    EP  - 30
    PB  - Science Publishing Group
    SN  - 2328-7683
    UR  - https://doi.org/10.11648/j.ijiis.20231202.11
    AB  - Mobile phones are an essential part of our day to day living. The increased reliance on mobile phone devices for communication, information sharing, connectivity and entertainment calls for a greater need to keep this device in a functional condition at all times. The epileptic nature of utility power supply, non-accessibility to power in remote locations and affordability of power due to high tariffs calls for a relative option to maintain connectivity of mobile phones. This research proposes to develop wearable embedded powered energy sources for charging mobile phones as a backup for instant and seamless charging of the phone battery once it drains. Our research addresses the inability of mobile phone users to charge their flatten phone batteries conveniently and seamlessly anytime and anywhere they find themselves. The hybrid powered charging system has the ability to harvest dissipated heat within the body of the phone and heat sources from the environment using an energy harvester, alongside the second energy source provided by the solar panel. The energy harvester will serve as a cooling measure to the device to maintain a stable temperature. The entire embedded device not only serves as an alternative power supply but also a protective covering to the mobile phone.
    VL  - 12
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Department of Electrical/Electronic Engineering, University of Port Harcourt, Port Harcourt, Nigeria

  • Department of Electrical/Electronic Engineering, University of Port Harcourt, Port Harcourt, Nigeria

  • Department of Computer Science, University of Port Harcourt, Port Harcourt, Nigeria

  • Department of Computer Science, University of Port Harcourt, Port Harcourt, Nigeria

  • Sections